Anchor flange is a device for connecting pipes, usually used to fix water pipes or air pipe systems to stabilize pipes. Anchor flanges can fix the pipes on the ground or walls, giving them better endurance and stability. It usually consists of two flanges and a middle pipe connection. A flange is a round gasket that is attached to the ends of a pipe. When the pipes are connected, bolts and nuts are needed to fix the flanges together, and the tightening force should be appropriate. The design and manufacture of anchor flanges need to consider the weight and pressure of the piping system to ensure its stability. It is usually widely used in steam systems, water supply systems, gas pipelines, etc.
Anchor flange is a special flange for connecting pipes, it has the following characteristics and advantages:
1. It can withstand greater internal pressure and external force, and has stronger bearing capacity.
2. It can improve the reliability and safety of the connection and reduce the occurrence of accidents.
3. The installation is simple and convenient, no need to use welding equipment and professional skills, reducing costs and risks.
4. It will not cause damage to the pipeline and protect the integrity and service life of the pipeline.
5. Wide range of applications, suitable for various types of pipes, pipes and media.
Process flow:
1. Preparatory work: Select suitable anchor flanges, pipes and fittings, and clean the pipe surface.
2. Install the flange: install the flange bearing at the end of the pipe, and connect the flange body and the flange cover to the pipe and the bearing respectively.
3. Fix the flange: Use bolts to fix the flange cover and flange body on the bearing, and tighten the bolts step by step.
4. Adjust the position: Adjust the position of the flange and bearing as required to keep them horizontal and vertical.
5. Complete the installation: Finally, check whether the connection between the flange and the pipe is tight and firm, and whether there are loopholes and defects.
