Our company produces DIN EN1092-1 Blind flanges engineering pressure PN2.5-PN400, DIN EN1092-1 Blind flanges size range DN10-DN3000 DIN EN1092-1 Blind flanges load weight is relatively large, DIN EN1092-1 Blind flanges is generally not easy to deform in engineering, the key is the thickness problem, large flange in the production of the inner and outer diameter is not a problem, especially difficult processing is their thickness.DIN EN1092-1 Blind flanges is too thin will be easy to deform, so the customer inquiry DIN EN1092-1 Blind flanges, our technicians according to the customer given engineering pressure, size and piece thickness, if the DIN EN1092-1 Blind flange is too thick, then clearly tell the customer that we can not produce, of course, the customer order in the production process generally will not appear deformation problem, after the machine tool will not happen, but in the process of use is dangerous.The DIN EN1092-1 Blind flanges was cut into strips with middle plates and then rolled into circles to reprocess waterlines, bolt holes, etc.This is generally DIN EN1092-1 Blind flanges, the larger can be done at 7 meters.This kind of flange has a very good quality assurance, because the raw material is medium plate, good density, the material has carbon steel, stainless steel, alloy steel, etc. DIN EN1092-1 Blind flange is a detachable connector and a high sealing product.The key is in the sealing material, the quality of the sealing material is directly related to the sealing quality of the flange products, it can be said that the sealing pad is small, but related to the sealing failure of the flange.
DIN EN1092-1 Blind flanges blind flange production process are forging, rolling and stitching
DIN EN1092-1 Blind flanges flange production process characteristics: DIN EN1092-1 Blind flanges blind plate flange production process of forging, rolling and splicing of three kinds
