ASME B16.47 A BL 60 " Flanges deformation
ASME B16.47 A BL 60 " Flanges product weight is relatively large, the product application of products to engineering installation is generally not easy to deform, the key is the thickness, customers in the inquiry ASME B16.47 A BL 60 " Flanges product price, we must pay attention to whether the thickness of its product is within the range specified in the standard, If the thickness is too thin for our factory to do, we will not provide the price to the customer. To communicate with customers in time, solve the problem of thickness, let customers react to their final customer ASME B16.47 A BL 60 " Flanges product thickness will affect the quality of their products, easy to connect with the pipeline during the installation process due to too large load weight and deformation. Haokun factory processing ASME B16.47 A BL 60 " Flanges products inside and outside the diameter is not a problem, it is very difficult to process their thickness. Large flange is too thin will be easy to deform, of course, in the production process generally will not appear deformation problem, after the machine tool treatment will not occur, but in the process of use is dangerous. Because ASME B16.47 A BL 60 " Flanges products carry a relatively large weight during use, With the weight of the pipe and its own deformation is inevitable, Customers must take into account the thickness of their products when purchasing ASME B16.47 A BL 60 " Flanges products, We can only process ASME B16.47 A BL 60 " Flanges products within the thickness allowed in the standard, Too thin and we can't do it, If you cannot avoid making the product thin under specific requirements, Then it can only increase the material hardness to avoid the deformation problem. In this way, the cost of raw materials increases, and we have to communicate with our customers in advance to confirm the price, drawings, and technical requirements before producing ASME B16.47 A BL 60 " Flanges products.
