Precautions for flange use and packaging
The load of the equipment in the flange package is transmitted to the rubber pad through the adjusting plate and the inner bracket, which can effectively damp the longitudinal vibration of the machine tool equipment; The lifting and lowering of the machine tool equipment can be adjusted through the adjustment plate and the load capacity of the pad can be significantly improved; The outer base is fixed to the concrete floor through the expansion screw, which can reduce the lateral vibration of the flange packaging equipment. The new type has simple structure and high load capacity, which can prevent or reduce the vibration of machine tools and equipment. It can be widely used as a shock absorber for equipment in various flange packages.
This group of weights should not be mixed with other weights. The placement method of weights should be gently placed on the scale plate, with the large weight in the center and the small stainless steel weight around the large weight. It is not allowed to put them on the side or stack them together. The box cover should be closed at any time to prevent dust from falling in
In flange inspection, the principle of "less weights" shall be followed in weighing.
During flange inspection, the weights shall be verified regularly according to the frequency of use, and verification records shall be made. If there is any doubt about the performance of the weight, it should be sent to the mechanism for testing immediately.
