High-temperature flange parts often need to be sealed at high temperature, if there is no good sealant in the separate pressure area of the additional seal, affected by the pressure, will cause production inaccuracy or deformation, this means that in a single pressure area there will be leakage under pressure, which requires unplanned repair.
A good candidate for high-temperature planar seals is the Bokos high-temperature sealant, which is formulated to be inert for standard applications in steam and gas turbines and high-temperature flanges and is therefore resistant to hot air, steam, and water, light fuel oil and lubricants are resistant to crude oil and natural gas. It is a one-component, paste-like sealant, industrial use, high-quality sealing mixture, suitable for smooth, flat sealing surface (Butt joint) temperature and pressure requirements of high conditions. Spread on a dry surface with a stucco or rubber spatula. As the sealing product will not cure, but its consistency will change slightly to maintain flexibility and flexibility, so there is no time required in use, construction can be put into operation immediately, without waiting. If you need to repair scratch damage to the high-temperature sealing surface, should be used with the Bokos high-temperature F series repair products.
